| Nominal Frequency |
10.000MHz to 625.000MHz
Some frequencies within this range may not be available. |
| Frequency Tolerance/Stability |
Inclusive of all conditions: Calibration Tolerance (at 25°C), Frequency Stability over the Operating Temperature Range,
Supply Voltage Change and Output Load Change
±50ppm Maximum |
| Operating Temperature Range |
0°C to +70°C
-20°C to +70°C
-40°C to +85°C
|
| Aging at 25°C |
±2ppm Maximum First Year, ±10ppm/10 Years Maximum |
| Supply Voltage |
3.3VDC ±5% |
| Input Current |
Unloaded
65mA Maximum |
| Output Voltage Logic High (VOH) |
VDD-1.025VDC Minimum, 2.4VDC Typical, VDD-0.6VDC Maximum |
| Output Voltage Logic Low (VOL) |
VDD-1.85VDC Minimum, 1.6VDC Typical, VDD-1.62VDC Maximum |
| Duty Cycle |
Measured at 50% of Waveform
50 ±10(%)
50 ±5(%)
|
| Rise Time/Fall Time |
Measured at 20% to 80% of Waveform
300pSec Maximum |
| Load Drive Capability |
50 Ohms into VDD-2VDC |
| Output Logic Type |
LVPECL |
| Absolute Pull Range |
Inclusive of all conditions: Calibration Tolerance (at 25°C), Frequency Stability over the Operating Temperature Range,
Supply Voltage Change, Output Load Change, Shock, Vibration, and 10 Year Aging over the Control Voltage (Vc)
±30ppm Minimum
±50ppm Minimum |
| Control Voltage |
Test Condition for APR
0.3VDC to 3.0VDC |
| Control Voltage Range |
0.0VDC to VDD +0.6VDC |
| Linearity |
5% Typical, 10% Maximum |
| Transfer Function |
Positive Tranfer Characteristic |
| Modulation Bandwidth |
Measured at -3dB, Vc = 1.65VDC
10kHz Minimum |
| Input Impedance |
500kOhms Minimum |
| Input Leakage Current |
10µA Maximum |
| Phase Noise |
Click to Open Phase Noise Table |
| Output Control Function |
Output Enable (OE) |
| Output Control Input Voltage Logic High (Vih) |
90% of VDD Minimum or No Connect to Enable Output and Complementary Output |
| Output Control Input Voltage Logic Low (Vil) |
10% of VDD Maximum to Disable Output and Complementary Output (High Impedance) |
| Output Enable Time |
100nSec Maximum |
| Output Disable Time |
50nSec Maximum |
| Output Enable Current |
Without Load (Pin 2 = Ground)
18mA Maximum |
| RMS Phase Jitter |
Click to Open RMS Phase Jitter Table |
| Period Jitter (Deterministic) |
0.2pSec Typical |
| Period Jitter (Random) |
2pSec Typical |
| Period Jitter (RMS) |
3pSec Maximum |
| Period Jitter (pk-pk) |
25pSec Maximum |
| Storage Temperature Range |
-55°C to +125°C |
| Start Up Time |
10mSec Maximum |