Log On  |  714-433-1200  |  Email Customer Support

Ecliptek is one of the ILSI America brands, which also include:

ILSI America MMD Oscilent

E13C7 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVPECL (PECL) 3.3Vdc 6 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)

Revision  K  08/08/2014

Electrical Specifications

Nominal Frequency 62.500MHz to 250.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance (at 25°C), Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Operating Temperature Range 0°C to +70°C
-40°C to +85°C
Supply Voltage 3.3VDC ±5%
Input Current 75mA Maximum over Nominal Frequency of 62.5MHz to 159.999999MHz
100mA Maximum over Nominal Frequency of 160MHz to 250MHz
Output Voltage Logic High (VOH) Click to Open Output Voltage Logic High Table
Output Voltage Logic Low (VOL) Click to Open Output Voltage Logic Low Table
Duty Cycle Measured at 50% of Waveform
50 ±5(%)
Rise Time/Fall Time Measured at 20% to 80% of Waveform
300pSec Typical, 700pSec Maximum
Output Logic Type LVPECL
Load Drive Capability 50 Ohms into VDD-2.0VDC
Phase Noise Click to Open Phase Noise Table
Logic Control / Additional Output Tri-State and Complementary Output
Tri-State Input Voltage (Vih and Vil) Vih of 70% of VDD Minimum or No Connect to Enable Output and Complementary Output, Vil of 30% of VDD Maximum to Disable High Impedance Output and Complementary Output
Standby Current Without Load
30µA Maximum
RMS Phase Jitter Fj=12kHz to 20MHz; Random
0.4pSec Typical, 1pSec Maximum
Storage Temperature Range -55°C to +125°C
Start Up Time 10mSec Maximum