Log On  |  714-433-1200  |  Email Customer Support

Ecliptek is one of the ILSI America brands, which also include:

ILSI America MMD Oscilent

EB13C3 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 3.3Vdc 4 Pad 5.0mm x 7.0mm Ceramic Surface Mount (SMD)

Revision  D  06/01/2015

Electrical Specifications

Nominal Frequency 6.144MHz to 40.000MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Aging at 25°C ±5ppm/year Maximum
Operating Temperature Range 0°C to +70°C
-40°C to +85°C
Supply Voltage 3.3VDC ±10%
Input Current Click to Open Input Current Table
Output Voltage Logic High (VOH) IOH= -4mA
90% of VDD Minimum
Output Voltage Logic Low (VOL) IOL= +4mA
10% of VDD Maximum
Duty Cycle Measured at 50% of waveform
50 ±10(%)
50 ±5(%)
Rise Time/Fall Time Measured at 20% to 80% of waveform
6nSec Maximum over Nominal Frequency of 6.144MHz to 25MHz
4nSec Maximum over Nominal Frequency of 25.000001MHz to 40MHz
Load Drive Capability 15pF Maximum
Output Logic Type CMOS
Logic Control / Additional Output Tri-State (High Impedance)
Output Control Input Voltage Logic High (VIH) 90% of VDD Minimum or No Connect to Enable Output
Output Control Input Voltage Logic Low (VIL) 10% of VDD Maximum to Disable Output (High Impedance)
Standby Current Disabled Output: High Impedance
10µA Maximum
RMS Phase Jitter Fj = 12kHz to 20MHz
1pSec Maximum
Period Jitter (Deterministic) 0.2pSec Typical, 3pSec Maximum
Period Jitter (Random) 2pSec Typical, 5pSec Maximum
Period Jitter (RMS) 3pSec Typical, 7pSec Maximum
Period Jitter (pk-pk) 40pSec Typical, 100pSec Maximum
Start Up Time 10mSec Maximum
Storage Temperature Range -55°C to +125°C