Log On  |  714-433-1200  |  Email Customer Support

Ecliptek is one of the ILSI America brands, which also include:

ILSI America MMD Oscilent

EH35 Series Oscillator
Quartz Crystal Clock Oscillators XO (SPXO) HCMOS/TTL (CMOS) 5.0Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)

Revision  F  02/27/2015

Electrical Specifications

Nominal Frequency 1.000MHz to 155.520MHz
Some frequencies within this range may not be available.
Frequency Tolerance/Stability (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration)
±100ppm Maximum
±50ppm Maximum
±25ppm Maximum
±20ppm Maximum
Aging at 25°C ±5ppm/year Maximum
Operating Temperature Range 0°C to +70°C
-40°C to +85°C
Supply Voltage 5.0VDC ±10%
Input Current No Load
50mA Maximum
Output Voltage Logic High (VOH) IOH= -16mA
2.4VDC Minimum with TTL Load
VDD-0.4VDC Minimum with HCMOS Load
Output Voltage Logic Low (VOL) IOL= +16mA
0.4VDC Maximum with TTL Load
0.5VDC Maximum with HCMOS Load
Duty Cycle 50 ±10(%) Measured at 1.4VDC with TTL Load or at 50% of waveform with HCMOS Load from 1MHz to 70MHz. Measured at 50% of waveform above 70MHz.
50 ±5(%) Measured at 50% of waveform.
Rise Time/Fall Time Measured over 0.8VDC to 2.0VDC with TTL load or from 20% to 80% of waveform with HCMOS load.
6nSec Maximum from 1MHz to 70MHz
4nSec Maximum from 70.000001MHz to 155.520MHz
Load Drive Capability 10 TTL Load or 50pF HCMOS Load Maximum from 1MHz to 70MHz
5 TTL Load or 15pF HCMOS Load Maximum from 70.000001MHz to 155.520MHz
Output Logic Type CMOS
Pin 1 Connection Tri-State (Disabled Output: High Impedance)
Tri-State Input Voltage (Vih and Vil) +2.2VDC Minimum or No Connect to Enable Output
+0.8VDC Maximum to Disable Output (High Impedance)
Absolute Clock Jitter ±250pSec Maximum, ±100pSec Typical
One Sigma Clock Period Jitter ±50pSec Maximum, ±30pSec Typical
Start Up Time 10mSec Maximum
Storage Temperature -55°C to +125°C